Airport Air Conditioning Units Sustainable

Secure Supplies Group will work with you on Non Public Road Airport Ground Vehicles. Converting all of them to green  Hydrogen Fueled  in and effort to reduce diesel use at airports.

This Achieves lower emissions and sustainable Certification for your ground teams and operators.  

Secure Supplies Conversion Solutions both Hybrid and 100% . Are fueled by our Green H2 Hydrogen Hub S1 Step Airport Package.

ACU-302

The ACU-302 Series Conditioned Air Units comprise a line of diesel-electric and utility-powered electric air conditioning and heating units designed to service narrow body, regional jet and commuter aircraft worldwide.

These units employ environmentally safe R-134a refrigerant. Designed with commercially available parts, the ACU-302 requires extremely low maintenance, yielding a long life span and consistently dependable operation.

ACU-802

The ACU-802 Series Air Conditioning and Air Conditioning/Heating Units provide maximum passenger comfort in all types of aircraft.

Available in a wide variety of configurations, these units meet the requirements of all aircraft operators regardless of fleet size or local ambient conditions. Using R-134a refrigerant, the ACU-802 Series are environmentally “Safe” causing no damage to the atmospheric ozone.

 

The units employ an air-to-air type refrigeration system, and for operators requiring heat, can be supplied with an optional reverse-cycle “heat pump” system. Provisions are made to utilize engine coolant heat to augment the reverse-cycle heat mode.

 

There are no dangers of combustion or its by-products near the aircraft. The “change-over” from one mode to another is so simple that it can be performed by the operator on the ramp. Heating and cooling modes are available as required throughout the day without taking the unit out of service for adjustment.

ACU-804

The ACU-804 Series is a line of self contained, fully portable air conditioning units suitable for single connection aircraft throughout the world.

The ACU-804 has sufficient capacity to achieve and maintain comfortable cabin temperatures on any narrow or medium bodied aircraft in any climate. The simple but rugged design consists of a diesel engine directly driving for refrigeration compressor and blower. This is the unique “TLD Direct Drive” technology. Additionally, a hydraulically driven condenser fan exhausts waste heat directly upward making it immune to performance fluctuations due to varying wind conditions and minimising heat and noise radiated to the immediate ramp area.

ACU-808

The ACU-808 Series Air Conditioning Units provide passenger comfort for the largest aircraft in the most challenging ambient.

These units are equipped with a vertical condenser air discharge for sound attenuation and consistent heat rejection under all wind conditions. Using R-134a refrigerant, the ACU-808-Series is environmentally ‘’safe’’, causing no damage to the atmospheric ozone. The simple but rugged design consists of a diesel engine directly driving for refrigeration compressor and blower. This is the unique “TLD Direct Drive” technology. Available truck or trailer mounted, the diesel powered ACU-808 Series is the air conditioner of choice for the future.

ACU-902

The ACU-902 is an ecologically smart choice to satisfy the requirements of all aircraft operators, regardless of fleet size or location.

The ACU-902 ensures passenger comfort while minimising energy consumption and generated noise. The Advanced Control System automatically regulates the delivered air pressure and temperature by sensing ambient conditions and aircraft temperature, and supplying precisely the cooling (or heating) required. This is smart energy usage – a key characteristic of the ACU-902. Another smart choice is the use of R-134a refrigerant, an environmentally safe refrigerant which causes no damage to atmospheric ozone while requesting less power for a given performance.

The ACU-902 is designed to minimise generated noise. All equipment except the condenser fans are located in a tightly sealed and heavily insulated equipment space that isolates machinery noises from the ambient environment. The blower inlet is lined with special material designed to absorb blower noise before it can be released into the environment. The ACU-902 is designed to 80 dB(A) at 3 meters during full load operation, and is nearly silent during partial load conditions.

ACU-904

The ACU-904 is an ecologically smart choice to satisfy the requirements of all aircraft operators, regardless of fleet size or location.

The ACU-904 ensures passenger comfort while minimising energy consumption and generated noise. The Advanced Control System automatically regulates the delivered air pressure and temperature by sensing ambient conditions and aircraft temperature, and supplying precisely the cooling (or heating) required. This is smart energy usage – a key characteristic of the ACU-904. Another smart choice is the use of R-134a refrigerant, an environmentally safe refrigerant which causes no damage to atmospheric ozone while requesting less power for a given performance.

The ACU-904 is designed to minimise generated noise. All equipment except the condenser fan is located in a tightly sealed and heavily insulated equipment space that isolates machinery noises from the ambient environment. The blower inlet is lined with special material designed to absorb blower noise before it can be released into the environment. The ACU-904 is designed to 80 dbA at 3 meters during full load operation, and is nearly silent during partial load conditions.

ACU-2000

The ACU-2000 Series trailer mounted Aircraft Heating Unit offers a range of models that deliver from 500,000 up to 1,000,000 Btu/Hr of clean pressurized, heated air to all aircraft or facilities equipped with a standard 8-inch (203mm) connector. The unit provides filtered air to maintain passenger comfort during aircraft turnover, or to maintain cabin temperature during layovers to prevent damage to onboard plumbing systems.

The gasoline engine supplies the thermal and mechanical energy required to operate the heating system. In the 500 KBtu/Hr model, the inlet air is heated by the blower heat of compression and then passes through a heat exchanger that recovers energy from the engine coolant circuit. In the 750 KBtu/Hr models an additional heat exchanger recovers energy from the engine exhaust. For the most severe environments the 1,000,000 Btu/Hr model combines these approaches with electric resistance heating elements powered by an external 90 KVA GPU connection (GPU not provided) The recovery and use of engine waste heat makes the ACU-2000 a very energy efficient unit. The design is inherently safe thru its avoidance of an open flame and its use of the exhaust gas to water heat exchanger which ensures no combustion by-products are introduced into the delivered air stream and eliminates the possibility of an over-temperature condition in the aircraft ductwork.

The ACU-2000 Series Heater provides operational modes to accommodate all weather conditions. In mild environment, use of the VENT mode allows a supply of ambient air to the aircraft, heated only by the blower heat of compression. In colder environments, HEAT mode is utilized to provide the full heating capability of the ACU-2000.

SCU-025

The SCU-025 is a supplemental, portable air conditioning unit that is designed to provide sub freezing air to aircraft in tandem with any large ACU. The SCU accepts cooled air from any suitable ACU and further cools the air to about minus 10°C (-15°F). This patented concept provides exceptional cooling efficiency while minimizing acquisition costs for subfreezing air systems. Equipment owners can continue to use their existing fleet of ACU’s in tandem with the SCU, resulting in a very low cost yet effective solution.

The simple yet rugged design consists of a diesel engine directly driving a refrigeration screw compressor and condenser fan. This is the unique “TLD Direct Drive” technology which provides more cooling for the same input power, and has a reduced part count, resulting in higher reliability and lower total cost of ownership.

The belt driven condenser fan exhausts waste heat directly upward making the unit immune to performance fluctuations due to varying wind conditions and minimizing heat and noise radiated to the immediate ramp area.

Secure Supplies  is ready to get Started on your Power Plant Project Are you ?

PLEASE Contact us now to 

GET THE PROCESS STARTED

 

We will Touch base on phone

and email shortly to Discuss a POWER PLANT PROPOSAL  .

Contact Us

United States 

Daniel Donatelli

Founder

Lets Talk  Whatsapp  
USA + 1 (520) 848-1659
Skype danieldonatelli@hotmail.com 

Email  danieldonatelli1@gmail com 

  • 01ab6619093f45388d66736ec22e5885
  • 23fd2a2be53141ed810f4d3dcdcd01fa
  • eb9767422f0e4c41a507d3e67c4ebac8
  • 6cc776af25744f77ab9c420b98d1abe6
Swagelok-hydrogen-gas-fittings

About Us

Secure Supplies Group is

an international collective of Engineers and High Technology Companies with a shared passion for promoting the world's most exciting

Hydrogen and Renewable Energy Solutions.

Manufacturing  Partners

Strategic Partners 

Event Partners

Secure Supplies Energy Power Gas Magazine ™

All Rights Reserved Worldwide. Copyright © 2012 Secure Supplies Limited Daniel Donatelli © 2009 

TRADEMARKS BELONG TO THEIR RESPECTIVE OWNERS. ALL RIGHTS RESERVED

 No duplication is permitted of this site graphically or
conceptually unless requested and approved in writing.

TERMS OF SERVICE // PRIVACY & COOKIE POLICY // LEGAL NOTICES // ADVERTISING OPPORTUNITIES // MODERN SALVERY POLICY // HSE POLICY

Work with us Employment